Kyocera KM-1500 User Manual

PRESCRIBE Command Reference
340
STRK — STRoKe current path
Format
STRK;
Parameter
None
Function
The STRK command strokes the constructed path onto the current page according to the
following current graphics state:
• Pen diameter (SPD)
• Dash pattern (DPAT)
• Fill pattern (FPAT)
• Line cap (SCAP)
• Line join (SLJN)
• Flatness (FLAT)
A path itself will not place a line or graphic on a page because PRESCRIBE path-
construction commands only define the path. For the path to be drawn or filled as a line,
box, character, etc., on the page, the STRK command must be issued.
After stroking the current path, the STRK command clears the path and moves the cursor
to the end of the path.
File
!R! RES; UNIT C;
NEWP;
PMZP 7, 17;
SPD .2;
PDRP -2.5, 0, 0, 2.5, 2.5, 0, 0, -2.5;
PDRP 2.1, 1.25, 1.25, -2.1, -2.1, -1.25, -1.25, 2.1;
PMRP 0, 2.5;
PDRP 2.1, -1.25, 1.25, 2.1, -2.1, 1.25, -1.25, -2.1;
STRK;
PAGE;
EXIT;

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g