Kyocera KM-1500 User Manual

PRESCRIBE Command Reference
86
DZP — Draw to Zero-relative Position
Format
DZP x-coordinate, y-coordinate;
Parameters
x-coordinate:
distance from the left edge limit of paper
y-coordinate:
distance from the top edge limit of paper
Function
The DZP command draws a line from the current cursor position to a position specified
relative to the top and left edge limits of the paper.
The thickness of the line is designated by the SPD (set pen diameter) command. The
coordinates and line thickness are measured in the value designated by the UNIT
command. The coordinates should be positive or zero. Negative coordinates are treated
as zero.
The DZP command is ignored within a path construction. To add a zero-relative line
segment in a path, use the PDZP (in Path, Draw to Zero-relative Position) command.
File
!R! RES;UNIT C;
MZP 0, 0; DZP 0, 5;
MZP 1, 0; DZP 0, 4;
MZP 2, 0; DZP 0, 3;
MZP 3, 0; DZP 0, 2;
MZP 4, 0; DZP 0, 1;
MZP 5, 0; DZP 0, 0;
PAGE;
EXIT;

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g