Kyocera KM-1500 User Manual

PRESCRIBE Command Reference
180
PARC — in Path, draw ARC
Format
PARC x-coordinate, y-coordinate, radius, start-angle,
end-angle;
Parameters
x-coordinate, y-coordinate:
coordinates of the center of arc, measured from the left and top edge limits
radius:
radius of arc
start-angle:
starting angle, measured counterclockwise from the positive x axis
end-angle:
ending angle, measured counterclockwise from the positive x axis
Function
This command first of all adds a line extending from the current position to the
beginning of the arc, then adds an arc to the current path. Coordinates and radius are
measured in the units designated by the UNIT command; the starting and ending angles
are measured counterclockwise from the positive x axis.
To draw a simple arc as specified by the parameters, the cursor must be moved to the
beginning of the arc by using the PMRA command. (See the example below.)
The arc is drawn at the starting angle through the ending angle in counterclockwise
direction only. After the path is stroked, the cursor remains at the ending angle of the arc.
File
!R! RES; UNIT C;
NEWP; SPD .1;
PMZP 5.0, 10.0;
PARC 6.5, 12.5, 1.5, 180, 270;
STRK;
NEWP;
CMNT This program draws a circle;
PMRA 6.5, 18, 1.5, 0;
CMNT Moves cursor 1.5 cm by 0 degree;
PARC 6.5, 18, 1.5, 0, 360;
STRK;
PAGE; EXIT;

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g