Kyocera KM-1500 User Manual

PRESCRIBE Command Reference
262
SCAP — Set line CAP
Format
SCAP mode;
Parameter
mode:
line cap mode:
1 = square caps
2 = butt caps
3 = round caps
Function
The SCAP command determines the shape of line ends (or a line cap) in a path where
they are finally stroked. The default caps is butt caps (2).
Square caps have square ends which extend one-half of a line width beyond the
endpoints of the line. Butt caps are similar to square caps but the caps are flash with the
endpoints and do not extend beyond them. Round caps end the lines with semicircular
caps with diameters identical to the line width.
File
!R! UNIT C; SPD .5;
NEWP; CMNT Round-capped on every end;
SCAP 3;
PMZP 6, 6;
SCP; SCP;
PDRP 1, -1; RPP;
PDRP 1, 1; RPP;
PDRP 5, 0;
STRK;
PAGE; EXIT;
Square caps (default)
Butt caps
Round caps

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g