Kyocera KM-1500 User Manual

PRESCRIBE Command Reference
260
SBM — Set Bottom Margin
Format
SBM length;
Parameter
length:
distance from top of paper to bottom margin
Function
The SBM command sets the bottom margin, as measured from the top edge limit of the
paper in the units designated by the UNIT command.
If an attempt is made to print below the bottom margin, the characters will be printed on
the next page.
A bottom margin setting in a document file should be placed at the beginning of the file
or at a page break.
The SPL (set page length) and SLPP (set lines per page) commands also set the bottom
margin, but these commands measure from the top margin position.
File
!R! RES; UNIT C;
STM 1; SLS 1; SBM 11;
SFNT ’Helvetica-Nr’;
EXIT, E;
Top margin at 1 cm, bottom margin at 11 cm. (Line 1)
Line 2
Line 3
Line 4
Line 5
Line 6
Line 7
Line 8
Line 9
Line 10
Line 11
Line 12
!R! PAGE; EXIT;

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g