Kyocera KM-1500 User Manual

XBCP 19
383
XBCP 19 — position symbols at the specified
locations
Format
XBCP 19[, x1, y1, x2, y2, x3, y3, ...];
Parameter
x1, y1, x2, y2, x3, y3, ...
x and y coordinates that represent the positions of the divided barcodes measured from
the current cursor position
Function
The multiple PDF417 symbol from one large data can be positioned at the specified
locations using the XBCP 19 command. X
1
, Y
1
is the relative location of second PDF
symbol to the first symbol, X
2
, Y
2
for third, and so on as measured from the current
coordinate (like the MRP command described on the printing system’s manual). The
remaining pairs of positioning parameters are ignored if there are no more PDF symbol
to print.
The relative location parameters, X
n
and Y
n
can not define the location beyond first
page. The positioning command such as MZP and ENDB should be used to specify the
macro PDF location if there are data beyond first page. PDF symbol will be positioned a
half inch below the previous PDF symbol if there are no positioning parameter exist or
insufficient number of positioning parameters exist.
The combination with multiple number of ENDB command allows to print multiple
number of macro PDF on multiple pages. Note RES, XBCP0, and XBAR command will
delete the remaining macro PDF data if all data has not been printed. Therefore, the page
eject should not be done by RES command.
File 1
In Macro PDF mode, data such as large as 3000 bytes print 3 90-column-by-30-row PDF
symbols at specified locations specified by XBCP 19. In the file below, the second line
XBCP 17 activates Macro PDF mode and specifies QualitySt for file-id. The third line
MZP command positions the first barcode at 1 inch each from the left and right paper
edge limits. The fourth line XBCP 19 moves the cursor 1 inch from the left and 2 inches
below the point where the first barcode started and prints the second barcode; then
moves the cursor 1 inch from the left and 2 inches below the point where the second
barcode started and prints the third barcode.:
!R! RES;
XBCP 17,"QualitySt";
MZP 1, 1;
XBCP 19,1,2,1,2;
XBAR; large data such as 3000 bytes;ENDB;
EXIT;

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g