Kyocera KM-1500 User Manual

XBAR
359
XBAR — print two dimensional barcode
Format
XBAR [data-length]; data-string;ENDB;
or
XBAR buffer-name;ENDB;
Parameters
data-length:
length of data in bytes, terminated with a semicolon (;)
If this value is omitted, data-string is counted all characters after the first semicolon until
the program sees ;ENDB; .
data-string:
data to be encoded, terminated with a semicolon (;) immediately followed by an ENDB
command (256 international characters or binary data)
buffer-name:
name of buffer previously defined by XBUF command
Function
The XBAR command prints a two dimensional barcode (sometimes referred to as
PDF417 symbol). The ENDB must follow as a terminator for the barcode data string.
Note that carriage return, line feed, space and all other characters must be counted as part
of data in the data string field. If data-length is omitted, 0, negative value, or non integer,
then data-string is counted all characters until the program sees ;ENDB;. If data-length
is 0, the semicolon to terminate the data cannot be omitted. (Command as
XBAR;;ENDB;.) It is necessary to have no space between ‘‘;” and ‘‘ENDB;”.

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g