Kyocera KM-1500 User Manual

SEM
283
SEM — Set Emulation Mode
Format
SEM mode;
Parameter
mode:
0 = Line Printer
1 = IBM Proprinter X-24E
2 = Diablo 630
5 = Epson LQ-850
6 = HP LaserJet/PCL
8 = KC-GL (Plotter)
9 = KPDL (an option on some models)
Function
The SEM command temporarily changes the printing system’s emulation mode. The new
mode remains in effect until another SEM or an RES (reset) command is issued.
The SEM command also resets the margins and various other parameters. It should
therefore be placed at the beginning of a program or file.
The SEM command does not change the power-up emulation mode. When power is
switched off, the printing system loses the mode set by the SEM command. Upon power
up, it retains the default emulation, which is set by the P1 parameter of the FRPO
command.
If you usually work in ‘emulation A’ but occasionally use ‘emulation B,’ it is convenient
to set ‘emulation A’ with the FRPO command and use the SEM command to change to
‘emulation B’ when necessary. In this case you must avoid using the RES command in
‘emulation B,’ because the RES command resets the printing system to ‘emulation A.’
File
!R! CMNT To work temporarily in the LQ-850 emulation;
SEM 5;
EXIT;

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g