BKLT
37
BKLT — print in BooKLeT binding
Format
BKLT binding;
Parameter
binding:
number representing binding mode:
0 = None
1 = Left-to-right binding
2 = Right-to-left binding
Function
The BKLT command allows printing a job as a booklet, reordering and printing the
pages two-up on a sheet of paper. Booklet printing requires the hard disk to be installed
in the printing system.
The job to booklet-print must be defined using the JOBS command. Used together with
the FOLD command, the paper can be folded in the middle to form a booklet.
Booklet printing is possible for documents of A4, A5, B5, letter, or statement size
documents and are automatically printed on double size paper, namely A3, A4-R, B4,
ledger, or letter-R. The original page size must be specified by the SPSZ command, for
example, SPSZ 8; for A4 page size. It is also possible to reduce the original page size by
commanding the second parameter for SPSZ. For example, to print two A4 pages on a
A4 sheet, command SPSZ 8, 5;. For details on page size, refer to the SPSZ command
page in this manual. The document must have the same page size for all pages. If the
double size paper for the document is not available in the printing system, the printing
system ignores the BKLT command and prints in the original paper size. Duplex printing
is also possible by adding the DUPX command. To correctly arrange two neighboring
pages in line, short-edge binding duplex must be used by commanding DUPX 2;.
The order of print pages can be selected by binding in either of the following manners:
a
b
a
b
a = First page
b = Last page
To Next Page
Loading...
Need help?
General
Weight and Dimensions
