Kyocera KM-1500 User Manual

PMRA
199
PMRA — in Path, Move to Relative position
specified by Angle
Format
PMRA x-coordinate, y-coordinate, distance, angle;
Parameters
x-coordinate, y-coordinate:
coordinates as measured from the left and top edge limits of the page
distance:
distance specified in increments governed by the unit value.
angle:
angle in degrees, measured counterclockwise from the positive x axis
Function
The PMRA command moves the cursor to a position in a path construction, specified
relative to the left and top edge limits of the page, then across a distance specified
relative to the x- and y-coordinate and at a specified angle.
It should be noted that the x and y coordinates are measured from the top and left edge
limits of the page, and not from the current cursor position.
The coordinates and distance are measured in the units designated by the UNIT
command. The angle is measured counterclockwise from the positive x axis.
New cursor position
Positive x axis
Angle
Distance
(x, y)

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g