Kyocera KM-1500 User Manual

DRP
79
DRP — Draw to Relative Position
Format
DRP x-coordinate, y-coordinate, ...;
Parameter
x-coordinate/y-coordinate:
coordinates as measured from the current cursor position
Function
The DRP command draws a line from the current cursor position to a specified relative
position. The thickness of the line is designated by the SPD (set pen diameter) command.
The coordinates and line thickness are measured by the value designated by the UNIT
command.
Multiple pairs of coordinates may be specified. The printing system then draws a
connected series of line segments, proceeding from one point to the next. For example,
DRP 1, 2, 3, 4; is equivalent to DRP 1, 2; DRP 3, 4;. The coordinates may
be positive or negative.
The DRP command is ignored in the path mode graphics. To add a line segment to a
path, use the PDRP (in Path, Draw to Relative Position) command.
File
!R! RES;
UNIT C; SPD .3;
CMNT Cube;
MZP 5, 10;
DRP 4, 0, 2, -2, 0, -4, -4, 0, -2, 2, 0, 4;
MRP 4, 0;
DRP 0, -4, -4, 0, 4, 0, 2, -2;
PAGE;
EXIT;

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g