Lenze EVF9324 User Manual

Configuration
Code table
8
8.3

8.3-1
EDSVF9333V EN 3.0-06/2005
8.3 Code table
How to read the code table:
Column Abbreviation Meaning
Code
Cxxxx Code Cxxxx
z Parameter value of the code can be defined
differently in each parameter set
z Parameter value is accepted immediately (ONLINE)
1 Subcode 1 of Cxxxx
2 Subcode 2 of Cxxxx
* Parameter value of the code is the same in all parameter sets
 Changed parameter or the code or subcode is accepted after pressing 
 Changed parameter of the code or subcode is accepted after pressing ,
if the controller is inhibited
Name Name of the code
Lenze Lenze setting (value on delivery or after restoring the delivery status w ith C0002)
Æ The column ”IMPORTANT” contains further information
Selection 1 {%} 99 min. value {unit}max. value
IMPORTANT - Short, important explanations
Code Possible settings IMPORTANT
No. Name Lenze Selection
C0002

PAR LOAD 1
Loading a parameter set
0 Load default Restore the delivery status
1 Load PS1
z Load parameter set saved in
the controller and activate it
z Parameter set 1 is loaded
automatically after every
mains connection
2 Load PS2
3 Load PS3
4 Load PS4
11 Load ext PS1
Load parameter set from the
keypad into the controller and
activate it
12 Load ext PS2
13 Load ext PS3
14 Load ext PS4
20 ext -> EEPROM Load all parameter sets from the
keypad into the controller
C0003

PAR SAVE 0
Save parameter set
0 Ready Saving is completed
1 Save PS1
Save the parameters loaded i n
the controller into a parameter
set (PS1 .... PS4)
2 Save PS2
3 Save PS3
4 Save PS4
11 Save extern All parameter sets (PS1 .... PS4)
must be transferred from the
controller to the keypad XT
C0004

Op display 56 0 {1} 1999 Operating display
z Keypad shows selected code in
the operating level if no other
status messages of C0183 are
active

Lenze EVF9324 Specifications

General

Brand	Lenze
Model	EVF9324
Category	DC Drives
Language	English