Wiring the standard device
Important notes
Protection of persons
5
5.1
5.1.1
5.1-1
EDSVF9333V EN 3.0-06/2005
5.1 Important notes
Stop!
The drive controller contains electrostatically sensitive
components.
The personnel must be free of electrostatic charge prior to
assembly and service operations.
5.1.1 Protection of persons
Danger!
Before working on the controller, check that no voltage is applied
to the power terminals:
ƒ Because the power terminals V, W, +U
G
and -U
G
remain live
for at least 3 minutes after disconnecting from mains.
ƒ Because the power terminals L1, L2, L3, U, V, W, +U
G
and -U
G
remain live with the motor stopped.
All pluggable terminals m ust only be connected or disconnected when no
voltage is applied!
Pluggable terminal strip
To Next Page
Loading...
Need help?
General
