Configuration
Code table
8
8.3
8.3-38
EDSVF9333V EN 3.0-06/2005
IMPORTANTPossible settingsCode
SelectionLenzeNameNo.
C0630 Max limit 100.00 -199.99 {0.01 %} 199.99 Upper limit, function block LIM1
z The analog input signal is
limited to the set value
See System
Manual
(extension)
C0631 MiN limit -100.0 -199.99 {0.01 %} 199.99 Lower limit, f unction block LIM1
z The analog input signal is
limited to the set value
C0632
CFG: IN 1000 FIXED0% Selection list 1 Configuration of analog input
signal, function block LIM1
C0633 DIS: IN -199.99 {0.01 %} 199.99 Function block LIM1
z Display of the signal linked in
C0632
C0640 Delay T 20.00 0.01 {0.01 s} 50.00 Time constant, function block
PT1-1
z Time period by which the
output of analog signal is
delayed
See System
Manual
(extension)
C0641
CFG: IN 1000 FIXED0% Selection list 1 Configuration of analog input
signal, function block PT1-1
C0642 DIS: IN -199.99 {0.01 %} 199.99 Function block PT1-1
z Display of the signal linked in
C0641
C0643 Delay T 20.00 0.01 {0.01 s} 50.00 Time constant, function block
PT1-2
z Time period by which the
output of analog signal is
delayed
C0644
CFG: IN 1000 FIXED0% Selection list 1 Configuration of analog input
signal, function block PT1-2
C0645 DIS: IN -199.99 {0.01 %} 199.99 Function block PT1-2
z Display of the signal linked in
C0644
C0650 DT1-1 gain 1.00 -320.00 {0.01 } 320.00 Gain, function block DT1-1
z Gain of the analog input signal
See System
Manual
(extension)
C0651 Delay T 1.000 0.005 {0.01 s} 5.000 Time constant, function block
DT1-1
z Time period by which the
output of analog signal is
delayed
C0652
CFG: IN 1000 FIXED0% Selection list 1 Configuration of analog input
signal, function block DT1-1
C0653 Sensibility 1
1 15 bits
Input sensitivity, function block
DT1-1
z According to the setting only
the indicated higher-order bits
are evaluated
2 14 bits
3 13 bits
4 12 bits
5 11 bits
6 10 bits
7 9bits
C0654 DIS: IN -199.99 {0.01 %} 199.99 Function block DT1-1
z Display of the signal linked in
C0652