Mindray BeneView T8 Operation Manual

Product Specifications
A-8
Output mode Relay
Electrical requirements ≤60W, ≤2A, ≤36VDC, ≤25VAC
Isolation voltage 1500 VAC
Contact type Normally open or normally contact (optional)
Defib Sync Pulse
Output impedance 50Ω
Max time delay 35 ms (R-wave peak to leading edge of pulse)
Amplitude
High level: 3.5 to 5 V, providing a maximum of 1 mA output
current;
Low level: < 0.5 V, receiving a maximum of 5 mA input current.
Pulse width 100 ms ±10%
Limited current 15 mA rating
Rising and falling time <1 ms
Digital video output (DVI-D connector)
Video signals Single Link TMDS
DDC Signals 12C compliant
A.4 Data Storage
Trends
Trends: 120 hours, at 1 min resolution
Minitrends: 1 hour, at 1 s resolution
Parameter alarms
100 alarms and related parameter waveforms. The waveform
recording length can be 8s, 16s or 32s.
Arrh. events
100 arrhythmia events and relate waveforms. The waveform
recording length can be 8s, 16s or 32s.
NIBP measurements 1000 sets
12-lead analysis results 40 sets
Full-disclosure waveforms
The storage time depends on the waveforms stored and the
number of stored waveforms.

Mindray BeneView T8 Specifications

General

Brand	Mindray
Model	BeneView T8
Category	Monitor
Language	English