Mindray BeneView T8 Operation Manual

Alarms
6-6
6.5 Using Alarms
6.5.1 Switching Individual Measurement Alarms On/Off
1. Select the parameter window for your desired measurement to enter its setup menu.
2. Select [Alarm] and toggle between [On] and [Off].
 [On]: The patient monitor gives alarm indications in accordance with the preset
alarm level and stores the related waveforms and parameters.
 [Off]: The alarm off symbol “ ” is displayed in the measurement parameter
window.
6.5.2 Setting the Alarm Level
1. Select the parameter window for your desired measurement to enter its setup menu.
2. Select [Alm Lev] and toggle between [High], [Med] and [Low].
6.5.3 Adjusting Alarm Limits
To adjust alarm limits for individual measurements:
1. Select the parameter window for your desired measurement to enter its setup menu.
2. In the setup menu, select the alarm limit you want to change and then select the
appropriate settings.

Mindray BeneView T8 Specifications

General

Brand	Mindray
Model	BeneView T8
Category	Monitor
Language	English