Mindray BeneView T8 Operation Manual

Basic Operations
3-9
3.8 Using a CF Storage Card
A CF storage card is used to prevent data loss in case of a sudden power failure. The patient
data such as trend data, waveform data, etc., will be automatically saved into the CF storage
card during patient monitoring. In case of a sudden power failure, the patient data can be
retrieved from the CF storage card after the patient monitor restarts.
Switching the patient monitor off before inserting or removing a CF card is a must. To insert
a CF storage card, open the compartment on the left side and then insert the card until the
button flips out. To remove the CF storage card, take the stick and use it to press the button
until the CF storage card flips out.
To browse the data saved in the CF storage card, follow this procedure:
1. Select [Main Menu]→[History Data >>].
2. Select a patient whose data you want to view from the [Patient Data List] and then
select [Review].
3. In the [Review] menu, select the data you want to review.
As reviewing the history patient’s data is just like reviewing the current patient’s data, you
can refer to the chapter
19 Review for details
NOTE
z Data may be unable to be saved into the CF storage card when the patient monitor
is just turned on.
CAUTION
z To avoid electrostatics, do not come into contact with the CF storage card when the
patient monitor is on.
CF storage card
Button
Stick

Mindray BeneView T8 Specifications

General

Brand	Mindray
Model	BeneView T8
Category	Monitor
Language	English