MTS Systems FlexTest IIm User Manual

MTS 793 Controller Hardware FlexTest GT Controller Connections
107
Accelerometer Connections
An accelerometer requires the Model 493.48 Acceleration mezzanine
card (installed in a Model 493.40 I/O Carrier module) and the Model
493.78 Accelerometer Transition Board.
• Each Model 493.48 Acceleration mezzanine card supports up to
three accelerometers.
• The transition board accommodates two types of accelerometers:
Low impedance Voltage Mode (LIVM) type accelerometers and
High Level Signal Conditioned type accelerometers.
Ch 1A In
Ch 2A In
Ch 3A In
m
J12 B Out
J11 B Out
Ch 1B In
Ch 2B In
Ch 3B In
493.78
Accel.
Transition
J6 I/O
J7 I/O
493.40
I/O Carrier
J3 Service
Shunt Cal
J4 I/O
J5 I/O
m
493.48 Acceleration
Conditioner
493.21B Universal
Conditioner
493.21B Universal
Conditioner
493.21B Universal
Conditioner
493.48 Acceleration
Conditioner
493.21B Universal
Conditioner
493.21B Universal
Conditioner
493.21B Universal
Conditioner
J6 I/O
J7 I/O
493.40
I/O Carrier
J3 Service
Shunt Cal
J4 I/O
J5 I/O
m
Accelerometer
Accelerometer
Accelerometer
LIVM
Accelerometer
Accelerometer
Accelerometer
High Level
Signal Conditioned
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

MTS Systems FlexTest IIm Specifications

General

Brand	MTS Systems
Model	FlexTest IIm
Category	Controller
Language	English