MTS Systems FlexTest IIm User Manual

MTS 793 Controller Hardware FlexTest GT Controller Connections
159
J52 Box Out
The J52 Box Out connector provides an interface for connecting
multiple MTS controller boxes together to allow sharing of station
interlock status and a master synchronization clock.
Last controller jumper The last controller box in a chain must have a jumper plug (MTS PN
100-079-126) on its J52 Box Out connector. This jumper allows the
return of the composite station interlock signal for all controllers in the
chain to monitor.
Note If there is only one controller, a jumper is still required on its Box
Out connector.
Cable specification Use MTS cable PN 056-534-1xx.
+clk in
/intlk out 2
/intlk out 1
/intlk out 3
/intlk out 4
test
-clk out
/intlk return in 1
/intlk return in 2
/intlk return in 3
/intlk return in 4
signal return
signal return
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
J52 Box Out
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

MTS Systems FlexTest IIm Specifications

General

Brand	MTS Systems
Model	FlexTest IIm
Category	Controller
Language	English