MTS Systems FlexTest IIm User Manual

Installing 497/498 Electronics (FTIIm)
MTS 793 Controller Hardware Installation
59
Installing 497/498 Electronics (FTIIm)
Contents Connecting the Console and Chassis Power 59
Grounding the Console and Chassis 60
Model 497.01 Analog Chassis 61
About Analog Chassis Slots 61
Analog Chassis Plug-in Modules 62
Analog Chassis Transition Modules 64
Adding an Analog Chassis to Your Console 66
Model 497.05 Hydraulic Control Panel 68
Test Processor Plug-in Modules 69
Test Processor Transition Modules 71
Connecting the Console and Chassis Power
Each chassis installed in your console can be configured for 115 or 230
V AC service. To configure each chassis for 230 V AC service, refer to
the following product manuals.
• 497.05 Hydraulic Control Panel (100-036-577)
• 497.01 Analog Chassis (100-036-577)
• 498.22/498.23 Test Processor (100-036-578)—for FlexTest IIm
How To Connect the Chassis Power Cables
You can plug the hydraulic control panel and the test processor chassis
into the AC power strip inside the console.
The analog chassis requires an external power supply. Typically, it is
connected to the hydraulic control panel. If you have more than one
analog chassis, you must plug each additional analog chassis into a
remote power supply.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

MTS Systems FlexTest IIm Specifications

General

Brand	MTS Systems
Model	FlexTest IIm
Category	Controller
Language	English