MTS 793 Controller Hardware Hydraulic Configurations
223
Compatible Controllers
You can mix Model 493.07, 458, 490, and 497.05 Controllers directly on
the same HPU (without the use of an HPU isolation box).
You cannot mix Model 493.07, 458, 490, and/or 497.05 Controllers with
436, 413.05, or 413.8X Controllers unless you use an isolation box.
You can jumper the Model 493.07 Converter box so you can use it
directly with 436 and 413.05 Controllers. However, if you do this you
must use an isolation box if you attempt to use the Converter Box with
Model 458, 490, and 497.05 Controllers. See Appendix B, “Model
493.07 Converter Box” on page 227.
Model 493.02 Chassis Multiple Controller Interconnections
FlexTest SE Controllers support the following hydraulic
interconnections for multiple controller configurations:
• Independent HSM control with no HPU
• Independent HSM control with a shared HPU
• Shared HSM with an HPU
• Shared HSM without HPU
• Independent HSM controlled with a shared HPU using first-on-
last-off
* For standard Model 493.07 Converter Box jumper setting only. Alternate settings are required for Model
436.11 and 413.05 controllers. See
Appendix B: Model 493.07 Converter Box.
J25
HPS
HPU
J25
HPS
039-708-7XX (24 V DC)
039-708-8XX (115 V AC)
J1
HPS
458* or
490.01*
497.05*
High-level Y cable
005-407-801 (24 V DC)
005-401-801 (115 V AC)
039-713-8XX (24 V DC)
039-714-6XX (115 V AC)
039-710-7XX (24 V DC)
039-710-8XX (115 V AC)
493.10
Chassis
493.07
Converter Box
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
