MTS Systems FlexTest IIm User Manual

MTS 793 Controller Hardware
FlexTest SE Controllers
Introduction
26
FlexTest SE standalone
function generation
A function generator (with a built-in cycle counter) in the controller
provides basic sine, square, triangle, and ramp command waveforms.
For tests requiring complex waveforms, the controller provides an
external command input to receive externally generated commands.
The function generator waveform can be output to another MTS
FlexTest SE Controller (or any external device) for synchronization.
FlexTest SE automated
configuration
In the automated configuration, the FlexTest SE Controller has added
capabilities—it can acquire data, perform automated testing, apply
complex control compensation techniques to the servoloop, and
execute sophisticated test procedures that include complex triggering
mechanisms.
The automated configuration includes the controller, a personal
computer, and the Model 793.00 System Software bundle. It may also
include optional MTS software for additional capability.
Model 493.02 Chassis
FlexTest SE Controllers use the Model 493.02 Chassis. The Model
493.02 Chassis is a single-station, single-channel VMEbus chassis
which, in a typical configuration, houses three plug-in modules:
• A Series 498 Processor
• A Model 493.40 I/O Carrier module
• A Model 493.42 System I/O module
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

MTS Systems FlexTest IIm Specifications

General

Brand	MTS Systems
Model	FlexTest IIm
Category	Controller
Language	English