Oki MICROLINE MX Series User Manual

Epson FX Emulation
239
Epson FX Emulation
Define CR Code
The Define CR Code option controls the action of the printer when it
receives a Carriage Return code (hex 0D) from the host computer.
If this feature is enabled, each time the printer receives a carriage
return, it inserts an additional Line Feed code (hex 0A) into the data
stream. Do not use this feature if the host computer sends line
feeds to the printer.
• CR = CR (default). Does not insert an extra line feed after each
carriage return.
• CR = CR + LF. Inserts an extra line feed after each carriage
return.
Printer
Protocol
(from page 207)
Define CR
Code
Auto LF Define LF
Code
Printer
Select
Character
Set
20 CPI
Condensed
Alt. Set
80-9F
CR = CR*
CR = CR + LF
Enable*
Disable
LF = LF*
LF = CR + LF
Disable*
Enable
(see page 242) Enable*
Disable
Control Code*
Printable
* = Factory Default
Epson FX

Oki MICROLINE MX Series Specifications

General

Brand	Oki
Model	MICROLINE MX Series
Category	Printer
Language	English