Chapter 7 Diagnosing Problems
312
11. Brush and vacuum the accumulated dust or residue inside the
lower cabinet.
12. Wipe the lower cabinet interior with a clean, lint-free cloth
dampened (not wet) with water and mild detergent or window
cleaning solution. Dry the lower cabinet interior by wiping it
down with a clean, lint-free cloth.
13. Install the ribbon and load paper.
Diagnosing Problems
This section is designed to help you fix problems which may arise
with normal printer operation.
Bar Code Verification
The most important consideration when printing a bar code is to
ensure that the bar code will be scanned properly. Incorporating a
bar code quality procedure in the printing process is the best way to
ensure that bar codes are being printed correctly. A properly
implemented verification procedure will increase overall bar code
quality, reduce waste from misprinted bar codes, and achieve high
first-time read rates. A high first-time read rate is an increasingly
important factor in newer, more efficient systems where manually
entered data is not acceptable as a backup function. Verification
also minimizes the costs of returned products due to poor reading
or unaccountable bar codes.
RJS designs and manufactures the world’s most complete line of
bar code verification products, including their portable Inspector
and Laser Inspector models, On-Line Inspector and AutoScan II
series. For more information on RJS bar code verifiers, visit their
web site at www.rjs1.com.
To Next Page
Loading...
Need help?
General