Epson FX Emulation
253
Received CR
• Observe (default). A CR code received from the host is
handled as a carriage return.
• Ignore. A CR code received from the host is ignored.
Received DEL
• Observe (default). A DEL code received from the host is
handled as a Delete command.
• Ignore. A DEL code received from the host is ignored.
Private Mode
Determines the default type of character set (Set 1 or Set 2). This
can also be set by ESC sequences ESC [>5h and ESC [>5l. Refer
to these descriptions in the
ANSI Programmer's Reference Manual
for further details.
Pos. on BC/OvrSz
• Set to top (default). The paper is fed back to the top of
barcodes or oversized characters after they are printed. This
allows printing on the same line.
• Set to bottom. The printer will continue printing without
backing up.
BC Check Digit
• By host (default). The host calculates the barcode check digit
and sends it along with the barcode. The check digit is not
verified by the printer but printed as it was received.
• By printer. The barcode is sent without the check digit, and the
printer calculates and adds it in.
ANSI Emulation
To Next Page
Loading...
Need help?
General