Optimizing Print Speed
83
HOST INTERFACE
The Host Interface Menu enables you to select and configure one
of many types of interfaces between the printer and your host
computer. The currently selected interface is indicated with an
asterisk on the control panel message display. Each interface has
its own submenu with a set of interface parameters which can be
configured.
IMPORTANT
When switching between Twinax, Coax, or Auto Switching, the
printer will load the power-up configuration and the new
interface parameters. Any settings made and not saved before
selecting these interfaces will be lost.
HOST
INTERFACE
(from page 68)
Twinax Coax IEEE 1284Auto
Switching*
Centronics Dataproducts
Serial Ethernet
(Available with
CT Option)
(Available with
CT Option)
(see page 86)(see page 84)
(see page 89) (see page 92)
(see page 96) (see page 105)
* = Factory Defaultt
E-Net
Adapter
(see page 104)
HOST INTERFACE
To Next Page
Loading...
Need help?
General