Chapter 3 Integrated Print Management System
48
Figure 20. Loading the Barcoded Ribbon
5. Place the full spool on the right hand side ribbon hub and press
it into place.
IMPORTANT
The full spool has a barcode label on the bottom side and a
date code label on the top. Once the sensor reads and logs the
ribbon barcode, the Integrated Print Management System
starts to track ribbon usage. A date code label is on the top
side of the right hand spool.
If you remove the ribbon during the course of its life and want
to re-install the same ribbon, be sure to place the same spools
on the correct hubs.
Right Hub
Spool
Date Code Label
To Next Page
Loading...
Need help?
General