Precautions for Operation
10
E5@C-T Digital Temperature Controllers User’s Manual (H185)
Precautions for Operation
• It takes approximately two seconds for the outputs to turn ON from after the power supply is turned
ON. Design the system (e.g., control panel) to allow for this delay.
• The Digital Controller requires 30 minutes to warm up after the power supply is turned ON. Always
turn ON the power supply at least 30 minutes before starting actual control operations.
• Avoid using the Digital Controller in places near a radio, television set, or wireless installing. The
Digital Controller may cause radio disturbance for these devices.
To Next Page
Loading...
Need help?
General
