Omron E5*C Series User Manual

6 Parameters
6 - 52
E5@C-T Digital Temperature Controllers User’s Manual (H185)
6-8 Manual Control Level
If you change to Manual Mode, the Manual MV parameter will be displayed and the displayed value will
be output as the MV.
For details on the setting method, refer to 5-11 Performing Manual Control.
• The MANU indicator will light during manual control.
• During manual operation, it is not possible to move to any displays other than the PV/MV (Manual
MV).
a-m
Power ON
Press the O Key for at
least 1 s; display will flash.
Operation
Level
Adjustment
Level
Press the O Key
for less than 1 s.
Press the S Key
for at least 1 s. *
Manual Control Level
Press the O Key for
at least 3 s.
Press the S Key for
at least 1 s* or the O
Key for at least 1 s.
*When the PF Setting parameter is set to A-M.
Program
Setting Level
PID Setting
Level
To move from any of the levels within the dotted line,
press the
S
Key for at least one seconds. (However,
the PF Setting parameter must be set to A-M.)
To move from the operation level to the manual control
level, hold the
O
Key down for at least three seconds
with the Auto/Manual Switch parameter displayed.
Control in progress

Omron E5*C Series Specifications

General

Brand	Omron
Model	E5*C Series
Category	Controller
Language	English