A - 9
A Appendices
E5@C-T Digital Temperature Controllers User’s Manual (H185)
A-3 USB-Serial Conversion Cable and Conversion Cable
A
A-3-1 E58-CIFQ2 USB-Serial Conversion Cable
A-3 USB-Serial Conversion Cable and
Conversion Cable
A USB-Serial Conversion Cable is used to connect the E5@C-T to a computer. The E58-CIFQ2-E Con-
version Cable is also required to connect to the Setup Tool port on the front panel of the E5EC-T or
E5AC-T. The following table lists the cables and ports that are used.
Refer to 2-4 Using the Setup Tool Port for the connection procedure.
z Specifications
Windows is a registered trademark of Microsoft Corporation in the United States and other
countries.
Note: Use a high-power port for the USB port.
Connection port Cable
Setup Tool port on top panel E58-CIFQ2 USB-Serial Conversion Cable
Front-panel Setup Tool port
(E5EC-T/E5AC-T only)
E58-CIFQ2 USB-Serial Conversion Cable and E58-CIFQ2-E Conversion
Cable
A-3-1 E58-CIFQ2 USB-Serial Conversion Cable
Item Specifications
Applicable OS Windows XP, Vista, or 7
Applicable software E5CC-T, E5EC-T, or E5AC-T: CX-Thermo version 4.61 or higher
Applicable models E5CB Series, E5C Series, and E5C-T Series
USB interface rating Conforms to USB Specification 2.0
DTE speed 38,400 bps
Connector
specifications
Computer end: USB (type A plug)
Digital Controller: Special serial connector
Power supply Bus power (Supplied from USB host controller)
Power supply voltage 5 VDC
Current consumption 450 mA max.
Output voltage 4.7±0.2 VDC (Supplied through USB-Serial Conversion Cable to the Digital
Controller.)
Output current 250 mA max. (Supplied through USB-Serial Conversion Cable to the Digital
Controller.)
Ambient temperature 0 to 55°C (with no condensation or icing)
Ambient humidity 10% to 80%
Storage temperature −20 to 60°C (with no condensation or icing)
Storage humidity 10% to 80%
Altitude 2,000 m max.
Weight Approx. 120 g
To Next Page
Loading...
Need help?
General
