Omron NX-EC0112 User Manual

4 - 5
4 Installation and Wiring
NX-series Position Interface Units User’s Manual (W524)
4-1 Installing Units
4
4-1-2 Attaching Markers
You can attach markers to NX Units and terminal blocks to identify them.
The plastic markers made by OMRON are installed for the factory setting. The ID information can be
written on them.
Commercially available markers can also be installed.
Replace the markers made by OMRON if you use commercially available markers now.
Insert the protrusions on the markers into the marker attachment locations on the NX Units and the ter-
minal blocks on NX Units.
Commercially available markers are made of plastic and can be printed on with a special printer.
To use commercially available markers, purchase the following products.
The markers made by OMRON cannot be printed on with commercially available special printers.
4-1-2 Attaching Markers
Marker Installation Method
Commercially Available Markers
Product name
Model number
Made by Phoenix Contact Made by Weidmueller
Markers UC1-TMF8 DEK 5/8
Special marker printer UM EN BLUEMARK X1 PrintJet PRO
Markers
Marker
Marker
Marker attachment location
Marker attachment location
Unit Terminal Block

Omron NX-EC0112 Specifications

General

Brand	Omron
Model	NX-EC0112
Category	Controller
Language	English