Omron NX-SID Series User Manual

Relevant Manuals
The following table provides the relevant manuals for this product. Read all of the manuals that are
relevant to your system configuration and application before you use the product.
Most operations on this product are performed from the Sysmac Studio Automation Software. For de-
tails on the Sysmac Studio, refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504).
Purpose of use
NX-series Safety Control Unit User's Manual NX-series Safety Control Unit / Communication Control Unit User's Manual NX-series Communication Control Unit Built-in Function User's Manual NX-series Safety Control Unit Instructions Reference Manual
Building a safety control system integrated with NJ/NX-ser-
ies CPU Units
l
Building a standalone safety control system with
EtherNet/IP Coupler Units
l
Building a safety network control system with Communica-
tion Control Units
l
Introduction to Safety Control Unit
l l
Setting devices and hardware
NX-SL5£££ Safety CPU Unit
l l
NX-SL3£££ Safety CPU Unit
l
NX-SI££££ and NX-SO££££ Safety I/O Units
l l
NX-CSG£££ Communication Control Unit
l
Software settings
NX-SL5£££ Safety CPU Unit
l l
NX-SL3£££ Safety CPU Unit
l
NX-SI££££ and NX-SO££££ Safety I/O Units
l l
NX-CSG£££ Communication Control Unit
l l
Creating safety programs
l l l
Testing operation and debugging
Safety programs
l l l
Safety process data communications
l l
Safety I/O functions
l l
Tag data links
l
Built-in functions for Communication Control Unit
l l
Learning about error corrections
NX-SL5£££ Safety CPU Unit
l l l
NX-SL3£££ Safety CPU Unit
l l
NX-SI££££ and NX-SO££££ Safety I/O Units
l l
NX-CSG£££ Communication Control Unit
l
Maintenance
Relevant Manuals
11
NX-series Safety Control Unit User's Manual (Z930)

Omron NX-SID Series Specifications

General

Brand	Omron
Model	NX-SID Series
Category	Controller
Language	English