Name: Omron NX-SID Series
Brand: Omron
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Event name SF_Equivalent Error Event code 74A40000 hex

Meaning An error was detected in execution of a safety function block.

Source Depends on where the Sysmac

Studio is connected and the sys-

tem configuration.

Source details NX Unit Detection tim-

ing

In DEBUG

mode (RUN) or

RUN mode

Error attrib-

utes

Level Minor fault Recovery Implement the

correction.

Log category System

Effects User program Continues. Operation The Unit continues to operate.

System-de-

fined varia-

bles

Variable Data type Name

None None None

Cause and

correction

Assumed cause Correction Prevention

Refer to information on the diag-

nostic code that is given for at-

tached information 1 in the NX-

series Safety Control Unit

Instructions Reference Manual

(Cat. No. Z931).

Implement the correction for the

relevant cause of the diagnostic

code that is given for attached in-

formation 1.

Program operation considering

the corrections that are given on

the left.

Attached in-

formation

Attached information 1: Diagnostic code

Precautions/

Remarks

None

Event name SF_ESPE Error Event code 74A50000 hex