Omron NX-SID Series User Manual

Description
Change or
addition
Corresponding unit version/
version
Reference
Sysmac Stu-
dio
Safety CPU
Unit
NX-SL££££
Function to change mod-
els
Addition Ver. 1.10 or
higher
Ver. 1.0 or later 5-3-3 Procedure to Change the
Model of the Safety Control Unit
on page
5 -
10
Monitoring memory us-
age
Addition 6-7 Monitoring Memory Usage
for Safety Control Unit on page
6 - 77
Setting the initial values
of variables
Addition 6-8-4 Setting the Initial Values of
Variables on page 6 - 82
Feedback setting
Addition 6-8-5 Feedback Settings on
page 6 - 83
Setting watchdog times
for safety process data
communications
Addition Ver. 1.10 or lat-
er
8-3-4 Changing FSoE Watchdog
Timers
on page 8 - 10
Transferring safety-vali-
dated safety application
data
Addition 7-3-3 Executable Functions in
Each Mode of the Safety CPU
Unit on page 7 - 14
Importing/exporting user-
defined function blocks
Addition
Ver. 1.12 or
higher
Ver. 1.0 or later 6-5-2 Registering POUs on
page 6 - 27
Data protection Addition 7-9-2 Data Protection on page
7 - 52
Simple Automatic Test Addition Ver. 1.15 or
higher
Ver. 1.0 or later 6-8-6 Simple Automatic Test on
page 6 - 84
Importing/exporting pro-
grams
Addition Ver. 1.17 or
higher
Ver. 1.0 or
higher
6-5-2 Registering POUs on
page 6 - 27
Program data protection. Addition 7-9-2 Data Protection on page
7 - 52
Checking external device
wiring
Addition 7-5 Checking External Device
W
iring on page 7 - 20
Supported model added.
• NX-SL5500
• NX-SL5700
Addition
Ver. 1.24 or
higher
Ver. 1.3 or later 2-1 Safety CPU Unit on page
2 - 2
Appendices
A - 110
NX-series Safety Control Unit User's Manual (Z930)

Omron NX-SID Series Specifications

General

Brand	Omron
Model	NX-SID Series
Category	Controller
Language	English