2.24.3 Walking Extension Features
2.24.3.1 Walking Extension
Description
It is possible to use any extension and have your extension settings available to you. Settings such as extension
number, one-touch dialling memory, and COS are all available to you at the new location. This feature is also
known as Walking Station.
[Example] This feature is useful when:
• Moving location
• There is no specific desk for your use.
Conditions
• This feature allows extension settings to be switched between PTs and SLTs. Moving between tenants is
also possible.
• Incoming calls to your extension will also reach you at your new location.
• An extension personal identification number (PIN) is required to use this feature. (® 2.24.1 Extension
Personal Identification Number (PIN))
• If a DSS Console is connected to a PT and the DSS Console is continuously used with the PT after Walking
Extension has been activated, the new extension number of the PT must be assigned as the paired
extension through system programming.
• If PC programming is being performed for extensions whose extension settings are being transferred by
the Walking Extension feature, the Walking Extension feature may not work properly (® 5.5.2 PC
Programming).
• If this feature is performed using an extension with a Bluetooth
®
wireless headset connected, the Bluetooth
device cannot be used with the new extension. To use the Bluetooth wireless headset, register it to the
new extension.
• This feature is not available for SIP extensions.
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Walking Extension
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main— Extension
PIN
User Manual References
1.13.1 Walking Extension
Feature Guide 245
2.24.3 Walking Extension Features
To Next Page
Loading...
Need help?
General