4.3.1.1 Making a TIE Line Call
Description
One of the following two methods can be used to make a TIE line call.
<Extension Number Method (Access without PBX Code)>
Dial the [Extension Number] only.
[Example]
Explanation:
To use this method, it is necessary to change the first one or two digits of extension numbers of either PBX
(e.g., 10XX for PBX-1, 20XX for PBX-2) to allow calls to be routed properly.
Case 1:
Extension 1012 of PBX-1 dials extension number "2011".
® Extension 1012 of PBX-1 is connected to extension 2011 of PBX-2.
Case 2:
Extension 1011 of PBX-1 dials extension number "3011".
® Extension 1011 of PBX-1 is connected to extension 3011 of PBX-3.
Feature Guide 357
4.3.1 TIE Line Service
To Next Page
Loading...
Need help?
General