by the System Administrator. The lowest numbered device is called first. If the first device cannot be called,
the second (then third) device will be called.
PC Programming Manual References
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Notification Parameters
→ Telephone Device
→ Telephone Device—Device No. 1, 2, 3—Notification Type
→ Telephone Device—Device No. 1, 2, 3—Only Urgent Messages
→ Telephone Device—Device No. 1, 2, 3—Dial Number [0-9 * # T X , ;]
→ Telephone Device—Device No. 1, 2, 3—No. of Retries
→ Telephone Device—Device No. 1, 2, 3—Busy Delay Time (min)
→ Telephone Device—Device No. 1, 2, 3—No Answer Delay Time (min)
→ Telephone Device—Device No. 1, 2, 3—Use Mode
→ Telephone Device—Device Notification Timer—Device Start Delay Time (0-120 min)
→ Telephone Device—Device Notification Timer—Device Interval Time between Device 1, 2, 3 and Next
Device
24.4 UM Configuration—[5-4] System Parameters—Parameters—Dialling Parameters/MSW Notification
User Manual References
Subscriber Operation
1.8.6 Other Features— Message Waiting Notification
Manager Operation
2.2.2 Message Manager Features— Setting Up Message Waiting Notification
3.2.1.32 Multilingual Service
Description
Allows a maximum of 8 languages to be used for system prompts. The System Administrator can select 5
languages for the multilingual selection menu, and assign a key for each language in the menu. Callers can
select the desired language by pressing the assigned key. The language used for system prompts heard by
subscribers is determined by Class of Service (COS).
PC Programming Manual References
24.4 UM Configuration—[5-4] System Parameters—Parameters—Prompt Setting
User Manual References
Manager Operation
2.2.2 Message Manager Features—
Recording Messages
3.2.1.33 No DTMF Input Operation
Description
Provides guidance to callers when several seconds pass without anything being entered by the caller.
Feature Guide 289
3.2.1 System Features
To Next Page
Loading...
Need help?
General