2.4.2 Line Preference—Incoming
Description
A PT user can select the method used to answer incoming calls from the following three line preferences:
Each of these line preferences can be assigned on each extension through personal programming (Preferred
Line Assignment—Incoming).
Type
Description
No Line Select a line by pressing the desired Line Access button to
answer an incoming call after you go off-hook.
PDN Answers a call arriving at a Primary Directory Number (PDN)
button simply by going off-hook. This works even when multiple
calls are received simultaneously.
(® 2.9.1 Primary Directory Number (PDN)/Secondary Directory
Number (SDN) Extension)
Prime Line Answer a call arriving at a Flexible CO or ICD Group button (on
which the "Prime Line" is assigned) simply by going off-hook. This
works even when multiple calls are received simultaneously.
Ringing Line (default) Answer the longest ringing call at one’s telephone simply by going
off-hook when multiple calls arrive.
Conditions
[Prime Line]
• The priority of the incoming call is as follows:
1. The call arriving at a button on which the "Prime Line" is assigned.
2. The call arriving at the INTERCOM button.
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 4— Incoming
Preferred Line
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 4— Incoming
Preferred Line
User Manual References
3.1.2 Settings on the Programming Mode
82 Feature Guide
2.4.2 Line Preference—Incoming