3.3.2 IMAP Integration
Description
By configuring an IMAP account, subscribers can access the contents of their mailboxes through an e-mail
client. All that is necessary is an e-mail client that supports IMAP4.
With IMAP integration, users can do the following:
• Play back voice messages
• View received fax messages
• Save voice and fax message data to their PCs
• Delete voice and fax messages
Conditions
• KX-NSU201, KX-NSU205, KX-NSU210, KX-NSU220, or KX-NSU299 (Activation Key for Unified
Messaging E-mail Notification) is required to use this feature. One activation key is required for each
mailbox that will be used with this feature.
• PBX resources are required to access the Unified Messaging system. To reduce the possibility that PBX
performance will be affected, the account in the e-mail client that is set up to access the subscriber’s
mailbox should be set to off-line mode. For details about off-line mode, refer to the e-mail client’s
documentation.
• New voice messages and fax messages can be sent as attachments to e-mails to a separate e-mail account
(® 3.2.1.29 Message Waiting Notification—E-mail Device).
• A tool for users to help manage IMAP connections is available. A link to where users can download the
tool is provided in Web Maintenance Console.
→ "Unified Message"—"Unified Messaging Plug in" in 8.2.1 Users—Add User—Single User
PC Programming Manual References
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Mailbox Parameters—
Mailbox Password
(Message client)
21.1 UM Configuration—[2] Class of Service—General
→ Fax Option
→ Desktop Messaging
User Manual References
Subscriber Operation
1.8.6 Other Features—
IMAP
318 Feature Guide
3.3.2 IMAP Integration
To Next Page
Loading...
Need help?
General