3.2.2.6 Call-through Service
Description
Allows subscribers to make outside calls by accessing the subscriber service menu (from an outside telephone)
and dialling an outside destination. This creates a trunk-to-trunk call.
PC Programming Manual References
21.1 UM Configuration—[2] Class of Service— Call-through Service
24.4 UM Configuration—[5-4] System Parameters—Parameters—Transfer to Outside— Outside Transfer
Sequence—Call Transfer to Outside Sequence (Up to 16 digits / [0-9 * # D F R T , ; N])
Feature Guide References
2.16.1 Direct Inward System Access (DISA)
User Manual References
Subscriber Operation
1.8.6 Other Features— Call-through Service
3.2.2.7 Call Transfer Scenario
Description
By combining the settings for Call Transfer and Incomplete Call Handling, you can create a call handling
"scenario" for your extension. Up to 20 scenarios can be created, and a scenario can be assigned to each
absent message.
PC Programming Manual References
8.1.1 Users—User Profiles—Advanced setting—Advanced Call Transfer Setting
8.1.1 Users—User Profiles—Advanced setting—Scenario Setting
Feature Guide References
2.20.2 Absent Message
3.2.2.8 Call Transfer Status
3.2.2.18 Incomplete Call Handling Service
3.2.2.8 Call Transfer Status
Description
Allows subscribers to specify how the Unified Messaging system will handle calls to their individual extensions.
Call Transfer Status options include: Call Blocking, Call Screening, Intercom Paging, Transfer to Mailbox,
Transfer to Specified Telephone Number, and Custom Service.
Feature Guide 299
3.2.2 Subscriber Features
To Next Page
Loading...
Need help?
General