a. Dial extension numbers directly
b. Spell the name of the desired party using the dial keys on their telephones (® 3.2.1.16 Dialling by
Name)
c. Listen to all subscriber names and select the desired extension (® 3.2.1.26 List All Names)
Automated Attendant (AA) answers incoming calls and redirects them to the desired extension based on
numbers dialled by callers.
When calls from extensions are transferred to other subscribers, "Transferring you to (name)." can be heard
by callers before the calls are transferred. This feature is not available when the name of called party is not
recorded.
The service can be programmed for day, night, lunch, and break time modes, and is available for both Port
and Trunk Services.
Callers will reach Automated Attendant service when:
a. The Incoming Call Service of a trunk or port is set to "Automated Attendant Service" (® 22.1 UM
Configuration—[3-1] UM Extension / Trunk Service—Service Group— Day, Night, Lunch, and Break
Mode - Incoming Call Service).
b. The call service of a Holiday is set to "Automated Attendant Service"
® 23.4 UM Configuration—[4-4] Service Settings—Holiday Table—
Service
c. They press [#8] (Automated Attendant Service Access Command) during a call.
d. A Custom Service or Personal Custom Service option is set to transfer callers to Automated Attendant
service.
® 20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—External MSG Delivery/Auto FWD/
Personal Custom Serv
® 23.3 UM Configuration—[4-3] Service Settings—Custom Service
e. A subscriber transfers the caller to Automated Attendant service.
PC Programming Manual References
23.2 UM Configuration—[4-2] Service Settings—Parameters
3.2.1.4 Automatic Two-way Recording for Manager
Description
Calls to and from specified extensions can be automatically recorded to a mailbox. Extensions are assigned
to a supervisor, who can listen to the recorded messages through Web Maintenance Console. For each
targeted extension, the following types of calls can be recorded:
• Intercom (internal) calls
• Trunk (external) calls
• Incoming ICD group calls only (i.e., when recording trunk calls, limit recording to incoming ICD group calls
only)
Recorded conversations are treated as new messages in the dedicated mailbox.
The period within which calls are recorded can be set through system programming.
Note
You should inform the other party that the conversation will be recorded.
Conditions
• KX-NSU002 (Activation Key for Two-way Recording Control) is required to use this feature. One activation
key is required for each UM group (i.e., site) where a mailbox has been specified as the recording
destination for this feature.
274 Feature Guide
3.2.1 System Features
To Next Page
Loading...
Need help?
General