• Press field of a desired report record, unless it is visible on the top of the
list, wind the list forward using navigating keys
• Report’s name consists of date and time
Caution:
It is possible to use an option for searching a report
19.10. Packages
Database of packages contains list of packages for which a name, code and
mass value are specified. During weighing process, if a name of packaging is
selected from the database, the tare value is automatically applied. The
display indicates mass value with minus sign.
Procedure
• Enter submenu < Databases>, and press < Packages> field
• Press < Add > key should a new packaging be added
• If a packaging record already exists in the database, press field with its
name, and insert data on the packaging.
Caution:
It is possible to use an option for searching a record by name or code.
19.11. Warehouses
Depending on work organizing, the Database of Warehouses contains list of
places used for picking up a sample for weighing / drying or list of places to
which a sample was delivered. Each Warehouse should have its name, code
and description specified. While weighing / drying process, and on selecting
name of a Warehouse, it is automatically assigned to the measurement result.
Procedure
• Enter submenu < Databases>, and press < Warehouses> field
• Press < Add > key should a new warehouse be added
• If a warehouse record already exists in the database, press field with its
name, and insert identifying data
Caution:
It is possible to use an option for searching a record by name or code.
To Next Page
Loading...
Need help?
General
