Please read the user manual carefully before instrument’s plugging to mains
and startup, even if the user is experienced with this type of moisture
analyzers.
2.9. Staff competence
Moisture analyzer MA 3Y series should only be operated and maintained by
personnel who is trained and experienced in using this type of instruments.
In order to use the moisture analyzer, first read the user manual. Keep these
instructions for the future reference.
Do not make any structural modifications. Additional equipment, which can be
connected to the moisture analyzer, should be supplied by RADWAG or an
authorized distributor.
2.9.1. Protective clothing
The use of protective clothing is highly recommended while working with the
instrument in order to take safety precautions against potential hazards
resulting from tested samples and ingredients.
Use the following while carrying out tests:
• protective apron,
• protective glasses,
• protective gloves (while working with hazardous chemical substances).
Before the use of the above-mentioned protective clothing, make sure that
they are designed to be used with specific samples and they are not damaged.
To Next Page
Loading...
Need help?
General
