Never – printout deactivated
First stable – the first stable measurement result obtained after
placing a load on moisture analyzer’s weighing pan is
recorded, record of the following measurement result
takes place only on unloading the weighing pan,
returning of the mass indication below set
threshold’s value, and placing another load on
balance’s weighing pan
Last stable – accepted is the last stable measurement recorded
before taking the load off the weighing pan. The
record takes place on taking the load off the
balance’s weighing pan, and returning of the mass
indication below set threshold’s value.
THRESHOLD – mass value obligatory for operation of automatic printout.
Set in grams.
− Printout
Contains type of printout that is related to a working mode. Printout takes
place on pressing PRINT key on moisture analyzer’s overlay.
Accessible options:
• STANDARD PRINTOUT
Possible declaration of printout content: HEADER, WEIGHING DATA
and FOOTER.
printout components marked as <YES> in the menu are printed on
pressing printout activating function key.
• NON-STANDARD PRINTOUT
Database of printouts enables selecting one of available non-
standard pri
ntouts visi
ble in menu <PRI
NTOUTS>, or des
igning a
unique printout which is automatically added to the databases.
Caution:
Means of designing printouts is described in point 16.5 of this user
manual.
11.7. Minimum Sample Weight
The weighing mode settings comprise a function of <Minimum sample>.
The function is enabled on specifying in the database <Database/Minimum
sample > parameters on methods for determining the minimum sample
and the values of minimal sample weight specific for a method. In standard
version, this database item is not filled in with data.
Activities related to determining minimum sample and adding data
to the database: <Databases/Minimum samples> are accessible
only for an authorized “RADWAG” personnel.
Should balance operator use the minimum sample mode, and data on
minimal sample weight are not entered to balance menu, then please
contact the local representative of “RADWAG” company.
To Next Page
Loading...
Need help?
General
