Last digit
The function determines visibility of the last decimal place
indicated on measurement result. The functions provides three
settings:
− Always: all digits are constantly visible
− Never: last digit is blanked
− When stable: last digit is displayed only on stable measurement
This parameter refers to environmental factors influencing
balance operation. It has two options: stable and unstable. If
the influencing factors are not stable it is recommended to set
the parameter to option unstable (by default it is preset to
stable). This option shortens the measurement time and thus
makes the measurement faster than for unstable option.
− Unstable
− Stable
15.6. Measuring units
This menu enables an operator of a moisture analyzer to declare the following
profile settings: start unit, supplementary unit and two custom measuring
units.
A custom measuring unit features:
o A multiplier
o A name (3 characters)
If a custom unit is designed, then its name is added to the list of accessible
measuring units.
This menu additionally enables inserting the value of gravitational acceleration
force for moisture analyzer’s place of use. It is obligatory should a moisture
analyzer be used to determine mass in [N].
To Next Page
Loading...
Need help?
General
