RL78/F13, F14 CHAPTER 34 ELECTRICAL SPECIFICATIONS (GRADE L)
R01UH0368EJ0210 Rev.2.10 1679
Dec 10, 2015
CHAPTER 34 ELECTRICAL SPECIFICATIONS (GRADE L)
Cautions 1. RL78/F13 and RL78/F14 have an on-chip debug function, which is provided for development and
evaluation. Do not use the on-chip debug function in products designated for mass production,
because the guaranteed number of rewritable times of the flash memory may be exceeded when
this function is used, and product reliability therefore cannot be guaranteed. Renesas
Electronics is not liable for problems occurring when the on-chip debug function is used.
2. With products not provided with an EV
DD0, EVDD1, EVSS0, or EVSS1 pin, replace EVDD0 and EVDD1
with V
DD, or replace EVSS0 and EVSS1 with VSS.
3. The pins mounted depending on the product. For details, refer to 1.5 Pin Configurations and 2.1
Pin Function List.
4. The products are classified into the following five groups according to the product type, pin
count, and code flash memory size. In this chapter, the products are referred to by group names
depending on the content. In this case, refer to the following classification.
Group A: RL78/F13 (LIN incorporated) products with 20, 30, 32, 48, or 64 pins and 16 Kbytes to 64
Kbytes of code flash memory
Group B: RL78/F13 (LIN incorporated) products with 48 or 64 pins and 96 Kbytes to 128 Kbytes of
code flash memory or with 80 pins and 64 Kbytes to 128 Kbytes of code flash memory
Group C: RL78/F13 (CAN and LIN incorporated) products with 30, 32, 48, 64, or 80 pins and 32
Kbytes to 128 Kbytes of code flash memory
Group D: RL78/F14 products with 30, 32, 48, 64, or 80 pins and 48 Kbytes to 96 Kbytes of code
flash memory
Group E: RL78/F14 products with 48, 64, or 80 pins and 128 Kbytes to 256 Kbytes of code flash
memory or with 100 pins and 64 Kbytes to 256 Kbytes of code flash memory
To Next Page
Loading...
Need help?
General
