RL78/F13, F14 CHAPTER 6 TIMER ARRAY UNIT
R01UH0368EJ0210 Rev.2.10 428
Dec 10, 2015
(3) Multiple PWM (Pulse Width Modulation) output
By extending the PWM function and using one master channel and two or more slave channels, up to seven types
of PWM signals that have a specific period and a specified duty factor can be generated.
Caution There are several rules for using simultaneous channel operation function.
For details, see 6.4.1 Basic rules of simultaneous channel operation function.
Remark m: Unit number (m = 0, 1), n: Channel number (n = 0 to 7),
p, q: Slave channel number (n < p < q ï‚£ 7)
6.1.3 8-bit timer operation function (channels 1 and 3 only)
The 8-bit timer operation function makes it possible to use a 16-bit timer channel in a configuration consisting of two 8-
bit timer channels. This function can only be used for channels 1 and 3.
Caution There are several rules for using 8-bit timer operation function.
For details, see 6.4.2 Basic rules of 8-bit timer operation function (channels 1 and 3 only).
Duty
Period
Interrupt signal (INTTMmn)
Duty
Period
Channel n (master)
Channel p (slave)
Channel q (slave)
Operation clock
Compare operation
Compare operation
Compare operation
Timer output
(TOmp)
Timer output
(TOmq)
To Next Page
Loading...
Need help?
General
