Copy Setting Parameters
This section describes the copy setting parameters.
Select Paper
Specifies the paper size used for printing copies.
When a tray is selected, the machine prints from that tray only.
When a paper size is selected, the machine prints from the trays that contain the paper of the
specified size, except the bypass tray. If tray 1 and tray 2 both contain the paper of the specified
size, the machine starts to print from the tray specified as the priority tray in [Paper Tray Priority]
under system settings. If that tray runs out of paper, the machine automatically switches to the other
tray to continue printing.
If tray 2 is not installed, only [Tray 1] and [Bypass Tray] appear.
Default: [Tray 1]
• Tray 1
• Tray 2
• Bypass Tray
• A4
• 8 1/2 × 11
Sort
Configures the machine to sort the output pages into sets when making multiple copies of a multi-
page document (P1, P2, P1, P2...).
Default: [Off]
• On
• Off
Original Type
Specifies the content of originals, to optimize copy quality.
Default: [Mixed]
• Text
Select this when the original contains only text and no photographs or pictures.
• Photo
Select this when the original contains photographs or pictures. Use this mode for the following
types of original:
• Photographs
• Pages that are entirely or mainly photographs or pictures, such as magazine pages.
• Mixed
7. Configuring the Machine Using the Control Panel
254
To Next Page
Loading...
Need help?
General
