If the Machine is Not Going to Be Used for a
Long Time
If the machine is going to be inactive for a long time, follow the procedure shown here.
• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric
shock.
• The inside of this machine becomes very hot. Do not touch the parts labeled " " (indicating a
hot surface).
• Unplug the power cord from the wall outlet before you move the machine. While moving the
machine, take care that the power cord is not damaged under the machine. Failing to take these
precautions could result in fire or electric shock.
Preparing the Machine for a Long Period of Inactivity
Use this procedure to prepare the machine for a long period of inactivity with its power switch turned off.
Note that not using the following procedure could result in unusual noises when use of this machine is
resumed.
• Do not switch off the machine during printing.
1. Turn off the power switch.
2. Pull out the plug from the socket.
If the Machine is Not Going to Be Used for a Long Time
419
To Next Page
Loading...
Need help?
General
