8. Configuring the Machine Using Web
Image Monitor
You can check the machine's status or change its settings by accessing the machine directly using Web
Image Monitor.
Using Web Image Monitor
• Some items might not appear, depending on the model type you are using.
• Some items can also be configured using the control panel.
Available operations
The following operations can be performed remotely using Web Image Monitor on a computer:
• Displaying the machine’s status or settings
• Configuring the machine's settings
• Registering the scan and fax destinations
• Registering the fax Special Senders
• Configuring the user restriction settings
• Configuring the network settings
• Configuring the IPsec settings
• Printing reports
• Setting the administrator password and e-mail address
• Resetting the machine's configuration to the factory default
• Creating backup files of the machine's configuration
• Restoring the machine's configuration from backup files
• Configuring the machine's date and time
• Configuring the machine's Energy Saver mode setting
Supported Web browsers
• Internet Explorer 6 or later
• Firefox 3.0 or later
• Safari 3.0 or later
• To operate the machine via Web Image Monitor, you must first configure the machine's TCP/IP
settings.
305
To Next Page
Loading...
Need help?
General
